One-Port Calibration

Instructive

This example is written to be instructive, not concise.:

import mwavepy as mv


## created necessary data for Calibration class

# a list of Network types, holding 'ideal' responses
my_ideals = [\
        mv.Network('ideal/short.s1p'),
        mv.Network('ideal/open.s1p'),
        mv.Network('ideal/load.s1p'),
        ]

# a list of Network types, holding 'measured' responses
my_measured = [\
        mv.Network('measured/short.s1p'),
        mv.Network('measured/open.s1p'),
        mv.Network('measured/load.s1p'),
        ]

## create a Calibration instance
cal = mv.Calibration(\
        ideals = my_ideals,
        measured = my_measured,
        )


## run, and apply calibration to a DUT

# run calibration algorithm
cal.run()

# apply it to a dut
dut = mv.Network('my_dut.s1p')
dut_caled = cal.apply_cal(dut)

# plot results
dut_caled.plot_s_db()
# save results
dut_caled.write_touchstone()

Concise

This example is meant to be the same as the first except more concise:

import mwavepy as mv

my_ideals = mv.load_all_touchstones_in_dir('ideals/')
my_measured = mv.load_all_touchstones_in_dir('measured/')


## create a Calibration instance
cal = mv.Calibration(\
        ideals = [my_ideals[k] for k in ['short','open','load']],
        measured = [my_measured[k] for k in ['short','open','load']],
        )

## what you do with 'cal' may  may be similar to above example